If your refrigerator is moldy, you might not be able to tell because the mold is inside and on the gasket. In order to remove the mold from there, you need to remove all of the food in the fridge and clean and then dry out the door gasket too. You can do this by taking the door off and then wiping it down with a cloth soaked in bleach.
Once everything is clean, you’ll need to dry it out completely by putting it in the sun or using an air conditioner. How to clean mold from refrigerator door gasket?
What is mold?
Mold can occur on many surfaces in a home, but it is most common on the inside of refrigerators and air conditioners. Mold can grow quickly in warm, moist environments and can produce allergens that can cause respiratory problems. To clean mold from refrigerator door gasket:
- Remove the refrigerator door if possible. If not, use a putty knife to scrape off any mold that is attached to the aluminum surface. Use a vacuum cleaner with the hose attachment to clean any mold that has grown onto the door or around the hinges.
- Wet a cloth and wring out some soap. Wipe down the area where mold grew, then scrub with the cloth until the area is clean. Rinse off the soap with cool water, then dry off the area.
How to Clean Mold from Refrigerator Gasket
Cleaning mold from refrigerator door gasket is a simple and easy process that can be done by following a few simple steps. First, remove any debris or food particles from around the gasket using a vacuum cleaner.
Then, pour a small amount of bleach into a bucket or container and add warm water to make a mixture that is slightly acidic. Wet the outer edge of the gasket with the solution and allow it to sit for about 30 minutes. Rinse the gasket with clean water and dry it off completely before replacing it on the refrigerator door.
How to Remove Mold from the Inside of a Refrigerator
Mold can be a serious problem in a refrigerator, causing food to spoil and smell bad. In this article, we’ll show you how to remove mold from the inside of a refrigerator door gasket.
- Remove the refrigerator door. If it’s not removable, use a knife to cut around the edges until it comes off.
- Clean the surface where the refrigerator door will sit. Use a bleach solution and scrub with a cloth or sponge. Make sure all surfaces are clean.
- Apply silicone sealant to the outside of the refrigerator door gasket (if applicable). This will help prevent mold from growing on the gasket again in the future.
- Replace the refrigerator door. Make sure to position it so that the gasket is in contact with the surface you cleaned in step 2.
- Reinstall the screws that held the refrigerator door in place.
Looking For a Refrigerator Repair Service in UAE?
Looking for a reliable and affordable Refrigerator repair service in UAE? Look no further than Albarouda.ae! Our team of experienced and qualified technicians are experts in repairing all types of ovens, from small to large, including traditional ovens and ovens with electronic controls.
We also offer a range of other home appliance repair services, such as refrigerator repair, dishwasher repair, washing machine repair, air conditioner repair and more. So if you’re looking for a trusted and reliable source for oven and all home appliances repairs in Ajman UAE, visit Albarouda.ae today!
Tips for Avoiding Mold in the Future
If your refrigerator is emitting an unpleasant smell, or if you see mold growing on the door gasket, it’s time to take action. Here are some tips for avoiding mold in the future:
- Clean the area around the refrigerator regularly. This includes cleaning the inside and outside of the doors, as well as any shelves and countertops that are close to it. Mold loves dark, moist areas, so make sure to clean everything up regularly.
- Keep your refrigerator clean and dry. Mold loves to grow in damp environments, so keep your fridge as dry as possible. If you must store food in the fridge, try to use containers that are airtight and moisture-resistant.
- Don’t use harsh cleaners on your refrigerator door gasket. Many cleaners contain chemicals that can damage the plastic material of the door gasket and create a breeding ground for mold growth. Instead, try using a mild soap and water solution or a gentle cleaner specifically designed for plastic surfaces like this one from Sanitizeit.
- Check for signs of leaks often. A leaking refrigerator can cause condensation to form on all surfaces inside and outside of the unit, which is perfect conditions for mold growth! If you notice any signs of leakage or moisture buildup on any part of your fridge, contact your appliance specialist for help repairing or replacing it.
- Avoid using humidifiers in your home. Moisture is one of the key ingredients Mold needs to grow, so avoiding areas that are constantly saturated with moisture is one of the best ways to keep your home free from mold.